CONSTRUCTION AND REPAIR. Internal waterproofing

Technical Documentation

IZOPLAST® HYDROLASTIC

Two-component elastic polymer-cement waterproofing slime


A two-component sealing sludge is used to provide moisture protection and water-proof, light, medium or heavy insulation. It can be used inside and outside buildings on all types of mineral substrates. It is recommended to seal terraces, balconies, wet rooms. Can be used on the surface of plasters and screeds in wet rooms, walls of basements and foundations exposed to constant contact with thorough water and in water reservoirs.

 

FEATURES AND BENEFITS:

  • good adhesion to all mineral substrates

  • highly elastic and covering the scratches

  • frost resistant

  • waterproof

  • does not require reinforcement

  • solvent-free, non-toxic

  • odorless and non-flammable

  • material for use on damp substrates

  • versatility of use, easy to make

 

TECHNICAL DATA:

  • application temperature: from +5 ° C to +25 ° C

  • substrate temperature: from + 5 ° C to + 25 ° C

  • pre-ripening time: about 5 min

  • time of using the prepared mixture: about 1 hour

  • pedestrian traffic after 3 days

  • maximum layer thickness: 2 mm

  • base: component A - mix of cement with mineral fillers and modifiers, component B - water-dispersion of polymers

 

The product complies with

 

Soil application IZOPLAST E NANO POWER reduces the consumption of IZOPLAST HYDROLASTIC, at the same time influencing the increase of physicochemical parameters of the finished coating.

 

APPLICATION:

Przedsiębiorstwo

Produkcyjno Handlowe

ADW Sp. z o.o.

43-175 Wyry, ul. Zbożowa 2

Tel.: 32 218 71 85

Fax. 32 323 00 85

 

adw@adw.com.pl

Kontakt

IZOPLAST® HYDROLASTIC

Two-component elastic polymer-cement waterproofing slime


A two-component sealing sludge is used to provide moisture protection and water-proof, light, medium or heavy insulation. It can be used inside and outside buildings on all types of mineral substrates. It is recommended to seal terraces, balconies, wet rooms. Can be used on the surface of plasters and screeds in wet rooms, walls of basements and foundations exposed to constant contact with thorough water and in water reservoirs.

 

FEATURES AND BENEFITS:

  • good adhesion to all mineral substrates

  • highly elastic and covering the scratches

  • frost resistant

  • waterproof

  • does not require reinforcement

  • solvent-free, non-toxic

  • odorless and non-flammable

  • material for use on damp substrates

  • versatility of use, easy to make

 

TECHNICAL DATA:

  • application temperature: from +5 ° C to +25 ° C

  • substrate temperature: from + 5 ° C to + 25 ° C

  • pre-ripening time: about 5 min

  • time of using the prepared mixture: about 1 hour

  • pedestrian traffic after 3 days

  • maximum layer thickness: 2 mm

  • base: component A - mix of cement with mineral fillers and modifiers, component B - water-dispersion of polymers

 

The product complies with

 

Soil application IZOPLAST E NANO POWER reduces the consumption of IZOPLAST HYDROLASTIC, at the same time influencing the increase of physicochemical parameters of the finished coating.

 

APPLICATION:

Przedsiębiorstwo

Produkcyjno Handlowe

ADW Sp. z o.o.

43-175 Wyry, ul. Zbożowa 2

Tel.: 32 218 71 85

Fax. 32 323 00 85

 

adw@adw.com.pl

Kontakt

IZOPLAST® HYDROLASTIC

Two-component elastic polymer-cement waterproofing slime


A two-component sealing sludge is used to provide moisture protection and water-proof, light, medium or heavy insulation. It can be used inside and outside buildings on all types of mineral substrates. It is recommended to seal terraces, balconies, wet rooms. Can be used on the surface of plasters and screeds in wet rooms, walls of basements and foundations exposed to constant contact with thorough water and in water reservoirs.

 

FEATURES AND BENEFITS:

  • good adhesion to all mineral substrates
  • highly elastic and covering the scratches
  • frost resistant
  • waterproof
  • does not require reinforcement
  • solvent-free, non-toxic
  • odorless and non-flammable
  • material for use on damp substrates
  • versatility of use, easy to make

 

TECHNICAL DATA:

  • application temperature: from +5 ° C to +25 ° C
  • substrate temperature: from + 5 ° C to + 25 ° C
  • pre-ripening time: about 5 min
  • time of using the prepared mixture: about 1 hour
  • pedestrian traffic after 3 days
  • maximum layer thickness: 2 mm
  • base: component A - mix of cement with mineral fillers and modifiers, component B - water-dispersion of polymers

 

The product complies with

 

Soil application IZOPLAST E NANO POWER reduces the consumption of IZOPLAST HYDROLASTIC, at the same time influencing the increase of physicochemical parameters of the finished coating.

 

APPLICATION:

Przedsiębiorstwo

Produkcyjno Handlowe

ADW Sp. z o.o.

43-175 Wyry, ul. Zbożowa 2

Tel.: 32 218 71 85

Fax. 32 323 00 85

 

adw@adw.com.pl

Kontakt

MENU

  1. pl
  2. en
Izoplast R-W
Izoplast B-W
Izoplast 2K-W
Izoplast KL
Izoplast MS
Izoplast Dysperbent
Czyścioch
Izoplast W-KL
Izoplast R
Izoplast B
Izoplast B Modyfikowany
Izoplast K
Izoplast Mega-Tex
Izoplast Hydrolastic
Izoplast E
Izoplast Nano Power
Izoplast FH Special
Izoplast Separbeton
Izoplast Barwiony
Izoplast Silver
Nordwood
Blackplast R
Uniepal-Drew Aqua Kolor
Bioforest
Uniepal-Drew Aqua 1-K
Uniepal-Drew Special FR
Mycetox M
Mycetox S
Ekosol Carbo
Fitoplaster
Mycetox Extra Fog
Provilep
Emulpar
Pyłobloker
Rzepakolep
Beton Plast Profi
Mega-Tex r
Zwilkop
Ice Melter Mike
Mycetox Extra
Ekosol Carbo Piece
Nordstone R
Emulpar Kleszcze Spray