DISINFECTION AND ADHESIVES

Disinfection

MYCETOX® M'

Fungicide for masonry


WE WILL DESTLY SAVE MUSHROOMS, MOLD IN PLASTICS AND PLASTERS. FOR INTERNAL USE AND ON OUTSIDE. INDEPENDENCE AT THE CLEANING OF PREMISES (MARBLE, LASTRIKO ETC.)

 

DESTINY:

Effectively fights mold and fungi on surfaces covered with paints and wallpaper. Can be used for cleaning roof coverings (eg ceramic roof tiles), cleaning tombstones, natural stones.

It is recommended to add Mycetox M 'to paints in order to protect the walls from attack by fungi.

The preparation can be used in residential and industrial premises, intended for permanent use stay of people.

 

APPLICATION:

The preparation in liquid form, ready for use. Do not dilute. Before working with the preparation remove mold fungi from the walls by scraping, eg with a spatula, a wire brush, etc., then wash the wall with water. After these activities, the wall should be soaked with the preparation with a brush, brush or spray. Protected surfaces should be soaked with the agent at least twice. The second layer should be done after soaking into the wall of the first layer. Freshly secured surfaces should not come into direct contact with food products until the protected surface is dry, i.e. approx. 8 hours.

The biocidal effect is obtained immediately after applying the agent and soaking the wall in an amount of ca. at least 0.15 1 / m2. During works and after their completion, the rooms should be ventilated until they disappear a specific smell. After this time they are suitable for use. The more moldy wall absorbs the preparation, this will penetrate deeper and more effectively destroy the spores of fungi in the cross-section of the entire wall. After the tools should be washed with warm water.

 

APPLICATION:

MYCETOX® M'

Fungicide for masonry


WE WILL DESTLY SAVE MUSHROOMS, MOLD IN PLASTICS AND PLASTERS. FOR INTERNAL USE AND ON OUTSIDE. INDEPENDENCE AT THE CLEANING OF PREMISES (MARBLE, LASTRIKO ETC.)

 

DESTINY:

Effectively fights mold and fungi on surfaces covered with paints and wallpaper. Can be used for cleaning roof coverings (eg ceramic roof tiles), cleaning tombstones, natural stones.

It is recommended to add Mycetox M 'to paints in order to protect the walls from attack by fungi.

The preparation can be used in residential and industrial premises, intended for permanent use stay of people.

 

APPLICATION:

The preparation in liquid form, ready for use. Do not dilute. Before working with the preparation remove mold fungi from the walls by scraping, eg with a spatula, a wire brush, etc., then wash the wall with water. After these activities, the wall should be soaked with the preparation with a brush, brush or spray. Protected surfaces should be soaked with the agent at least twice. The second layer should be done after soaking into the wall of the first layer. Freshly secured surfaces should not come into direct contact with food products until the protected surface is dry, i.e. approx. 8 hours.

The biocidal effect is obtained immediately after applying the agent and soaking the wall in an amount of ca. at least 0.15 1 / m2. During works and after their completion, the rooms should be ventilated until they disappear a specific smell. After this time they are suitable for use. The more moldy wall absorbs the preparation, this will penetrate deeper and more effectively destroy the spores of fungi in the cross-section of the entire wall. After the tools should be washed with warm water.

 

APPLICATION:

MYCETOX® M'

Fungicide for masonry


WE WILL DESTLY SAVE MUSHROOMS, MOLD IN PLASTICS AND PLASTERS. FOR INTERNAL USE AND ON OUTSIDE. INDEPENDENCE AT THE CLEANING OF PREMISES (MARBLE, LASTRIKO ETC.)

 

DESTINY:

Effectively fights mold and fungi on surfaces covered with paints and wallpaper. Can be used for cleaning roof coverings (eg ceramic roof tiles), cleaning tombstones, natural stones.

It is recommended to add Mycetox M 'to paints in order to protect the walls from attack by fungi.

The preparation can be used in residential and industrial premises, intended for permanent use stay of people.

 

APPLICATION:

The preparation in liquid form, ready for use. Do not dilute. Before working with the preparation remove mold fungi from the walls by scraping, eg with a spatula, a wire brush, etc., then wash the wall with water. After these activities, the wall should be soaked with the preparation with a brush, brush or spray. Protected surfaces should be soaked with the agent at least twice. The second layer should be done after soaking into the wall of the first layer. Freshly secured surfaces should not come into direct contact with food products until the protected surface is dry, i.e. approx. 8 hours.

The biocidal effect is obtained immediately after applying the agent and soaking the wall in an amount of ca. at least 0.15 1 / m2. During works and after their completion, the rooms should be ventilated until they disappear a specific smell. After this time they are suitable for use. The more moldy wall absorbs the preparation, this will penetrate deeper and more effectively destroy the spores of fungi in the cross-section of the entire wall. After the tools should be washed with warm water.

 

APPLICATION:

Beton Plast Profi
Bioforest
Blackplast R
Czyścioch
Ekosol Carbo
Ekosol Carbo Piece
Emulpar
Fitoplaster
Ice Melter Mike
Izoplast 2K-W
Izoplast B
Izoplast B Modyfikowany
Izoplast Barwiony
Izoplast B-W
Izoplast Dysperbent
Izoplast E
Izoplast FH Special
Izoplast Hydrolastic
Izoplast K
Izoplast KL
Izoplast Mega-Tex klej
Izoplast Mega-Tex szpachla
Izoplast MS
Izoplast Nano Power
Izoplast R
Izoplast R-W
Izoplast Separbeton
Izoplast Silver
Izoplast W-KL
Mega-Tex r
Mycetox Extra
Mycetox Extra Fog
Mycetox M
Mycetox S
Nordstone R
Nordwood
Provilep
Pyłobloker
Rzepakolep
Tickend
Uniepal-Drew Aqua 1-K
Uniepal-Drew Aqua Kolor
Uniepal-Drew Special FR
Zwilkop
  1. pl
  2. en

MENU

Awards and prizes: