CONSTRUCTION AND RENOVATION

Fire protection of wood

Technical Documentation

UNIEPAL-DREW® AQUA 1-K

Fire-resistant varnish for wooden floors


DESTINY:

UNIEPAL-DREW AQUA 1-K water-borne polyurethane varnish is designed for fire-retardant protection and decorative finishing of wooden surfaces made of wood species domestic, OSB boards, plywood and wood-based materials used indoors residential and public utilities. The varnish has a high hardness and abrasion resistance which makes it possible application on floorings, parquets, stairs, furniture in public utility premises.

Products coated with UNIEPAL-DREW AQUA 1-K lacquer in an amount of at least 200 g / m2, have been categorized in terms of fire resistance: wood of all kinds (except exotic wood) and products wood with a thickness of at least 12 mm - as non-inflammable (B-s1, d0), floor made of wood of any type (except for exotic wood) with a thickness of at least 12 mm - as hardly flammable (Bfls1).

Permissible value of maximum VOC content below 130 g / l in a ready-to-use product. Content VOC in the product below 130 g / l.

 

PREPARATION OF SUBSTRATE:

Fill any surface defects, clean, degrease and dust the substrate.

UNIEPAL-DREW AQUA 1-K should be applied only to surfaces made of raw wood o relative humidity not exceeding 20%. After drying, the varnish creates a satin coating. surfaces made of oak wood additionally require the application of a nitrocellulose or alcohol base.

 

UNIEPAL-DREW AQUA 1-K has an EUROPEAN TECHNICAL ASSESSMENT.

 

APPLICATION:

Przedsiębiorstwo

Produkcyjno Handlowe

ADW Sp. z o.o.

43-175 Wyry, ul. Zbożowa 2

Tel.: 32 218 71 85

Fax. 32 323 00 85

 

adw@adw.com.pl

Kontakt

UNIEPAL-DREW® AQUA 1-K

Fire-resistant varnish for wooden floors


DESTINY:

UNIEPAL-DREW AQUA 1-K water-borne polyurethane varnish is designed for fire-retardant protection and decorative finishing of wooden surfaces made of wood species domestic, OSB boards, plywood and wood-based materials used indoors residential and public utilities. The varnish has a high hardness and abrasion resistance which makes it possible application on floorings, parquets, stairs, furniture in public utility premises.

Products coated with UNIEPAL-DREW AQUA 1-K lacquer in an amount of at least 200 g / m2, have been categorized in terms of fire resistance: wood of all kinds (except exotic wood) and products wood with a thickness of at least 12 mm - as non-inflammable (B-s1, d0), floor made of wood of any type (except for exotic wood) with a thickness of at least 12 mm - as hardly flammable (Bfls1).

Permissible value of maximum VOC content below 130 g / l in a ready-to-use product. Content VOC in the product below 130 g / l.

 

PREPARATION OF SUBSTRATE:

Fill any surface defects, clean, degrease and dust the substrate.

UNIEPAL-DREW AQUA 1-K should be applied only to surfaces made of raw wood o relative humidity not exceeding 20%. After drying, the varnish creates a satin coating. surfaces made of oak wood additionally require the application of a nitrocellulose or alcohol base.

 

UNIEPAL-DREW AQUA 1-K has an EUROPEAN TECHNICAL ASSESSMENT.

 

APPLICATION:

Przedsiębiorstwo

Produkcyjno Handlowe

ADW Sp. z o.o.

43-175 Wyry, ul. Zbożowa 2

Tel.: 32 218 71 85

Fax. 32 323 00 85

 

adw@adw.com.pl

Kontakt

UNIEPAL-DREW® AQUA 1-K

Fire-resistant varnish for wooden floors


DESTINY:

UNIEPAL-DREW AQUA 1-K water-borne polyurethane varnish is designed for fire-retardant protection and decorative finishing of wooden surfaces made of wood species domestic, OSB boards, plywood and wood-based materials used indoors residential and public utilities. The varnish has a high hardness and abrasion resistance which makes it possible application on floorings, parquets, stairs, furniture in public utility premises.

Products coated with UNIEPAL-DREW AQUA 1-K lacquer in an amount of at least 200 g / m2, have been categorized

in terms of fire resistance: wood of all kinds (except exotic wood) and products wood with a thickness of at least 12 mm - as non-inflammable (B-s1, d0), floor made of wood of any type (except for exotic wood) with a thickness of at least 12 mm - as hardly flammable (Bfls1).

Permissible value of maximum VOC content below 130 g / l in a ready-to-use product. Content VOC in the product below 130 g / l.

 

PREPARATION OF SUBSTRATE:

Fill any surface defects, clean, degrease and dust the substrate.

UNIEPAL-DREW AQUA 1-K should be applied only to surfaces made of raw wood o relative humidity not exceeding 20%. After drying, the varnish creates a satin coating. surfaces made of oak wood additionally require the application of a nitrocellulose or alcohol base.

 

UNIEPAL-DREW AQUA 1-K has an EUROPEAN TECHNICAL ASSESSMENT.

 

APPLICATION:

Przedsiębiorstwo

Produkcyjno Handlowe

ADW Sp. z o.o.

43-175 Wyry, ul. Zbożowa 2

Tel.: 32 218 71 85

Fax. 32 323 00 85

 

adw@adw.com.pl

Kontakt

MENU

  1. pl
  2. en
Izoplast R-W
Izoplast B-W
Izoplast 2K-W
Izoplast KL
Izoplast MS
Izoplast Dysperbent
Czyścioch
Izoplast W-KL
Izoplast R
Izoplast B
Izoplast B Modyfikowany
Izoplast K
Izoplast Mega-Tex
Izoplast Hydrolastic
Izoplast E
Izoplast Nano Power
Izoplast FH Special
Izoplast Separbeton
Izoplast Barwiony
Izoplast Silver
Nordwood
Blackplast R
Uniepal-Drew Aqua Kolor
Bioforest
Uniepal-Drew Aqua 1-K
Uniepal-Drew Special FR
Mycetox M
Mycetox S
Ekosol Carbo
Fitoplaster
Mycetox Extra Fog
Provilep
Emulpar
Pyłobloker
Rzepakolep
Beton Plast Profi
Mega-Tex r
Zwilkop
Ice Melter Mike
Mycetox Extra
Ekosol Carbo Piece
Nordstone R
Emulpar Kleszcze Spray